Taloyhtiölaajakaista Poutamäentie 11

Suomi Communications Oy provides internet connection to the housing company – Apartment-specific speed is 1000/1000 Mbps

Joining

Usage

Testing speeds

Joining the housing company internet and billing

Taloyhtiölaajakaista veloitetaan vastikkeessa. Connections from other operators can still be used at the resident’s own expense, and cancelling them is the resident’s responsibility. A €69 connection fee (incl. 25.5% VAT) will be charged to the resident for connecting at a later date.

Using the housing company internet

The connection can be used from the apartment’s distribution cabinet using the ATK port. Tietokoneen tai WiFi-reitittimen voi yhdistää tähän porttiin ja yhteys alkaa toimimaan. Kytkentäkaappi sijaitsee yleensä eteisessä ja se näyttää usein valkoiselta peltikaapilta.

Inside the distribution cabinet, there are additional numbered Ethernet ports. These can be used to extend the connection to corresponding numbered sockets in the apartment.

A router must be used with the connection. ADSL and VDSL modems cannot be used, as the service is delivered via an Ethernet connection. The recommended minimum requirements for the router are:

  • WAN and LAN ports must support 1000 Mbps Ethernet speeds
  • Wi-Fi 6/AX standard is recommended for wireless connectivity
  • Ethernet cables should be at least CAT6 standard

Each connected apartment will receive one (1) IPv4 address, so devices should be in routing mode.

Connection Setup Options

Single Device via Cable

  1. Connect an Ethernet cable in the apartment's distribution cabinet to the ATK port.
  2. Plug the other end in the distribution cabinet into port 1.1.
  3. Connect another Ethernet cable from port 1.1 on the apartment's wall socket to your device.

Multiple Devices Wirelessly

  1. Connect an Ethernet cable from the ATK port in the distribution cabinet to a numbered port (e.g. port 1.1, 1.2, etc.).
  2. Plug another Ethernet cable from this port into the router's Internet (”WAN port”).
  3. Find the SSID (network name) and password. Connect your device to the wireless network.

Multiple Devices via Cable

  1. Connect an Ethernet cable from the ATK port into the router's Internet (”WAN port”).
  2. Plug Ethernet cables from the router's LAN ports to the corresponding apartment ports (e.g. 1.1, 1.2, etc.).
  3. Connect devices to the wall sockets using Ethernet cables.

Testing the housing company internet speed

We recommend using the free Speedtest® by Ookla application to test the connection speed.
Do not use the browser version, as it can provide inaccurate results.

How to Perform a Speed Test

  1. Connect your computer via cable to the SuomiCom housing company broadband.
  2. Download and install the appropriate Speedtest app for your device. Download links are available alongside this page and on the official website.
  3. Open the application, select Speedtest server: Suomi Communications Oy, Espoo and start the test.

Important Notes

Ensure you are not on WiFi during the test, as wireless connections limit speed and can give inaccurate results. Test the speed directly from the Ethernet port in the apartment’s distribution cabinet for the most accurate results.

For 1000/1000 Mbps speeds, the Ethernet cable should be at least CAT5e or newer. The computer’s network card must support at least 1 Gbps speeds for the test to be reliable.

Download the Speedtest Application

Choose the appropriate Speedtest® application for your device:

Speedtest® for Windows

Speedtest® for Mac